E-Map - RHINO H.264 Network DVR User Manual

6.1.4. E-Map

Video Viewer is also a Central Management System (CMS) software, which allows
network device control & management for up to 16 devices simultaneously.
Note: Before using this function, make sure Video Viewer is connected to all the
devices (up to 16) you want to monitor.
E-Map is ONLY available when the control panel is switch to the full function version.
How to Add an E-Map Group
STEP1: In the simplified version, click "
version, and click "
Note: To know where the buttons are, please refer to "Simplified Version (Default)
at page 31, and "Full Function Version" at page 32.
STEP2: Right-click to show the shortcut menu on the top-left panel, and select the
E-Map group you want to add. There are three E-Map groups you can add:
Google E-MAP, Single E-MAP, and Building E-MAP.
" to switch the control panel to the full function
" to enter the E-Map page as follows.
36
REMOTE OPERATION