System Setting; Password Setting - RHINO H.264 Network DVR User Manual

Make sure the ID setting of the camera is the same as the setting here, or the DVR
will not be able to control the device.
Note: To know the default ID of the PTZ camera, please refer to its user manual.
3) PROTOCOL
Select NORMAL (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.
4) RATE
Select the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 /
57600 / 115200).
Make sure the baud rate setting of the camera is the same as the setting here, or
the DVR will not be able to control the device.
Note: To know the default baud rate of the PTZ camera, please refer to its user
manual.

5.6 System Setting

5.6.1 Password Setting

Right-click to display the main menu, and select "SYSTEM"
TOOLS
SYSTEM INFO
USB BACKUP
DVD BACKUP
EXIT
1) ADMIN PASSWORD
Click "SETUP" to change the administrator password. The default administrator
password is 0000.
When you're prompted to enter the DVR password, enter the administrator
password, and
are allowed.
2) OPERATOR PASSWORD
Click "SETUP" to set or change the operator password. .
When you're prompted to enter the DVR password, enter the operator password,
and will be shown on the status bar of the screen and the main menu is NOT
allowed to access.
SYSTEM
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
will be shown on the status bar of the screen and all operations
24
FREQUENTLY-USED FUNCTIONS
"TOOLS".
ENGLISH
SETUP
SETUP
SUBMIT