Adjusting Tv Format Selections Manually - BenQ Joybook T31 Series User Manual

Adjusting TV format selections manually

ATI CATALYST® Control Center determines the signal format from
Regional and Language Options selections in Control Panel; however,
when you travel to another country/region, you might need to re-adjust
TV format selections manually. To do so, follow the steps below.
The settings of TV formats may vary by country/region. For details about
which format is used in your country/region, check with your local
authorities.
1. Turn off Joybook and connect it to the TV or VCR using an S-Video
cable.
2. Press the <Fn> + <F3> hotkey combination to switch between
Joybook's own screen and the external display device, or use
simultaneous display.
3. Right-click on Windows Desktop and then select ATI CATALYST(R)
Control Center in the menu that appears. If a pop-up menu is
displayed afterwards, select Advanced.
4. Select Formats from the left menu bar, click the Select by country/
region radio button, and then choose the desired country/region from
the drop-down list.
Connecting to external display devices 29