Installation - Vision VN6XEHi-Standard D1 Hardware Installation Manual

6. Installation

■ How to mount to ceiling / wall
①
Drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the holes.
②
Fix the plastic anchors in the holes.
③
Position the mounting bracket on the screw points.
④
Fix the mounting bracket by tightening the screws.
Slightly loosen bolt (A) then adjust tilt(180˚) and rotation(360˚) of the camera using a serration
⑤
on the bracket and tighten the bolt firmly.
Slightly loosen bolt (B) then adjust pan(360˚) of the camera and tighten the bolt firmly.
⑥
Page 7 / 14