6. Installation
6.1. Installation overview
Page 8 / 16
The ceiling tile should be applied for only when there is
an additional support available for it to hold the
camera with enough strength after the installation.
Take it off after drilling the mounting hole on the guide.
Pease make sure to attach the Moisture protection
sponge securely on the back of the base. Warranty is
void if it is not attached properly.
Pre installation of the base is possible.
Mounting holes are compatible to the industry
standard 2‐gang electric junction box.
Screws are supplied in the package.
The camera set is separated from the base with the
supplied 2 mounting screws.
Dome cover is externally revolved with hand for
multiple uses. Press the dome and turn it to a clear
part with hand when the existing part of the window is
scratched or contaminated. No need to disassemble
the dome for this job.