Vision VN6XEHi-Standard D1 Hardware Installation Manual page 8

■ Axis Adjustment
■
Lens external adjustment, EXT-Video
Zoom & Focus External Adjustment with Lens Dial (Patent pending)
■
OSD Manual for functions control
- How to use tactile switch on the OSD control
Push – to enter the menu or to save settings.
Push up or down – select functions.or zoom control
Push left or right – to adjust levels or focus control
Page 8 / 14
① Pan 360˚
Slightly loosen Pan bolt, then adjust pan of the
camera using a serration on the bracket and
tighten the bolt firmly again
② Tilt 180˚
Slightly loosen Tilt bolt, then adjust tilt of the
camera using a serration on the
bracket and tighten the bolt firmly again
③ Rotation 360˚
Slightly loosen Tilt bolt then adjust rotation
of the camera using a serration on the
bracket and tighten the bolt firmly again
- How to use EXT-video
① Turn open the OSD cap counterclockwise.
OSD cap is designed to be hanging from the
camera even after opening it.
② Connect Extra video output connector
(A) to camera tester or local monitor as shown in
the above. Then, control the lens by using
Zoom & Focus dial.