Table of Contents
Advertisement
Fitting a decor panel
Model BW450 is supplied in white with a decor frame around the main door
and lower panel (see Fig. 12). To fit the panel proceed as follows:-
1. Remove the 3 screws on each side and four screws on the lower edge of the
door.
2. Remove the decor panel
3. Cover this panel with a sheet of laminated plastic so that it co-ordinates
with your kitchen.
4. Replace the decor panel and replace the screws in the frame.
The laminated covering sheet should have the following measurements:-
Width
436mm
Height
592mm
Max. Thickness
4mm.
Advertisement
Table of Contents
