Technical Data; Safety And Machine Protection Facilities; Proper Use - Frank COBRA C Operating Instructions Manual

Operating instructions
Parquet floor sander COBRA C
with gentle lifting lever
3.2

Technical data

Single-phase AC motor
Motor power
Sanding drum speed
Sanding width
Sanding belt dimensions
Machine weight
3.3

Safety and machine protection facilities

COBRA C is equipped with an
overcurrent cutout and an
-
no-volt release
-
The overcurrent cutout protects the machine from damage and persons from endangering in the
case of short circuits.
The no-volt release prevents uncontrolled restart of the machine after power failure. The motor
will not restart automatically when the power returns, it will have to be switched on again.
4

Proper use

The parquet floor sander COBRA C is suitable for dry sanding of parquet and plank
floors. No other use is allowed.
Caution!
Never use COBRA C for wet procedures (mortal risk from electric shock)!
230 V, 50 cps
2500 W
2100 rpm
200 mm
200 mm x 750 mm, endless
78 kg
9