Adjusting The Sanding Pressure - Frank COBRA C Operating Instructions Manual

Operating instructions
Parquet floor sander COBRA C
with gentle lifting lever
7.6

Adjusting the sanding pressure

Use the pressure regulating screw to adjust the required sanding pressure.
High sanding pressure:
Turn the pressure regulating screw inwards as far as it will go.
Medium sanding pressure:
Turn the pressure regulating screw outwards to the upper marking (1) on the screw thread.
Low sanding pressure:
Turn the pressure regulating screw outwards to the lower marking (2) on the screw thread.
1
2
19