Operation; Service Parts; Maintenance - Broan PM250 SERIES Instructions For Assembly Operation

OPERATION

Controls
Light switch: turns the lamps on and off.
Blower switch: makes it possible to select the motor operating speed.
Position 0: motor off; Position I: motor lower speed; Position II: motor
high speed.

MAINTENANCE

ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE
CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.
Grease Filter
The grease filter should be cleaned frequently. Use a warm detergent
solution. Grease filter is dishwasher safe.
To remove the grease filter: remove the (4) screws and take off the
metal grid. Take off the metal wires and remove the grease filter.
GREASE
FILTER
Non-Ducted Recirculation Filter
The Non-Ducted Recirculation filter should be changed every 6
months.
To remove the Non-Ducted Recirculation filter:
1. Remove the grid taking off the (4) "A" screws 3.9x6mm (Fig. 3).
2. Remove the metal wires (Fig. 4) and replace the Non-ducted
recirculation Filter.
Cleaning
Occasional care will help preserve its fine appearance.
• Clean with warm water and mild detergent only.
• Follow all cleaning by rinsing with clear water.
• Wipe dry with clean, soft cloth.
Light bulbs
This range hood requires two 40-Watt light bulbs (not included).
To change bulbs:
1. Remove the 2.9x9.5mm screw securing the light fitting.
2. Pull down lens to remove.
3. Replace with light bulbs of the same type (MAX 40W, 120V,
Candelabra Base Bulb). CAUTION: BULB MAY BE HOT!
BLOWER SWITCH
LIGHT SWITCH
FIG. 6
METAL WIRES
FIG. 7
FIG. 8

SERVICE PARTS

KEY NO. PART NO.
5 B03118152
5 B03127681
9 B08087922
23 B03295095
24 B03295094
27 B02011270
28 B02300280
29 B03294794
230 BE3348475
236 B02300822
236 B02300826
237 B02300823
237 B02300827
332 BE3248476
415 B03202454
CAS R730090
998 B080810782
- B06108604
- -
- B08999040
DESCRIPTION
Grid (White)
Grid (Silver)
Grease Filter
Upper Lampholder
Lower Lampholder
Metal Wire
Lampholder
Light Fitting
Controls Closing
Blower Switch (White)
Blower Switch (Black)
Light Switch (White)
Light Switch (Black)
Cover Controls
Strain Relief Bushing
Blower Assembly
Hardware Package
Socket Assembly
(Includes key No.24, 23, 28)
"40 Watt Max.Candelabra
Bulbs not included"
Non-Ducted Filter Kit
(purchased separately)