Probasics KNEE WALKER 1030 User Manual page 4

Step 5: To Attach Basket
- Attach basket by lining up the bracket on
basket with the screws on the Knee Walker.
<Step 5>
Step 6: To Adjust the Brakes
- Use an Allen wrench to loosen the hand lever
and reposition and re-tighten to a comfortable
position.
- The brake tightness can be adjusted with the
nuts at either end of the brake cable. Turning
the screw clockwise will loosen the brake and
turning the screw counter clockwise will
tighten it.
- Squeeze the hand brake lever and push down
the parking brake lock, and the Knee Walker
will be locked.
Squeeze the hand brake lever again to release
the parking brake lock. (Figure C)
(Figure C)
To Operate the Knee Walker:
- Place your hands on the handlebars.
- Place the injured leg comfortably resting on
the center of the knee platform.
- Release the brake to move yourself forward or
backward slowly with small steps with your
other leg, keeping the knee of your injured foot
centered on the knee platform.
- The Knee Walker can make turns by simply
moving the handlebars with a minimum amount
of effort. Turns should only be performed while
at a slow rate of movement. To turn right, rotate
handlebars to the right. To turn left, rotate
handlebars to the left.
- With practice, you should be able to move
forward without deviating to the opposite side.
Knee Walker Features