Table of Contents
Advertisement
Disassembly
24
3.
At the top of the front housing, gently pry up and lift the transceiver PC board
out of the front housing.
Front
Housing
Figure 9. Removing and Replacing the Transceiver PC Board
4.
To replace, insert the bottom of the circuit board into the bottom of the front
housing (display side down) and gently press the top of the circuit board into
the front housing.
5.
Replace the rear housing, SIM, battery, and battery cover as described in the
procedures.
July 08, 2005
Transceiver PC Board
Disassembly
Tool
6809495A42-O
E1 GSM
041102o
Advertisement
Table of Contents
Troubleshooting
