Setting The Beep Sound; Activating The Auto Power Off Function - Yamaha POCKETRAK C24 Reference Manual

Setting the beep sound

You can set the recorder so that it will make a beep sound when you operate the buttons or if you
make an operational error.
1.
Press the [MENU/FOLDER] button while the main screen is
displayed, press the [PLAY]/[STOP] buttons to select [COMMON
MENU] → [BEEP SOUND], then press the [REC] button.
2.
Press the [PLAY]/[STOP] buttons to select [ON], then press the
[REC] button.
3.
Press the [PLAY]/[STOP] buttons to select the desired volume
option , then press the [REC] button.
To cancel the beep sound, select [OFF] in step 2.
HIGH:
MIDDLE: Medium volume
LOW:

Activating the Auto Power Off function

If this function is turned on, and you leave the recorder turned on but unused for a specified
duration, the recorder will automatically turn off (except during recording, VAS recording
standby mode, playback or metronome operation).
1.
Press the [MENU/FOLDER] button while the main screen is
displayed, press the [PLAY]/[STOP] buttons to select [COMMON
MENU] → [AUTO OFF], then press the [REC] button.
2.
Press the [
function the Auto Power Off, then press the [REC] button.
0 (OFF)–15 (15 min.)
You can specify the time in 1 minute steps.
To cancel the Auto Power Off function, specify [0](OFF).
POCKETRAK C24 Reference Manual
High volume
Low volume
]/[ ] buttons to select the desired time to
11
Preference Settings
56