Connecting To An Already-Paired Device Via Bluetooth Connection; Disconnecting A Bluetooth Connection - Yamaha NX-P100 Owner's Manual



Connecting to an already-paired device via Bluetooth connection

For pairing, please see "Pairing" (☞ P. 4).
1
Lit in blue


Disconnecting a Bluetooth connection

When you perform any one of the following operations during a Bluetooth connection, the connection will be disconnected.
•
Hold down the (Power) button on this unit (for about one second).
• Disconnect the Bluetooth connection at the connecting device.
• Touch the NFC mark with the smartphone with NFC function during Bluetooth connection.
•
Turn off the power of this unit.
When the connection is disconnected, the color of the LED indicator will change from blue to orange (when the power is turned off,
its light will go out).
2
NFC mark
Bluetooth connection
1.
Press the (Power) button to turn
on the power of this unit.
2.
Connect the already-paired
connecting device to this unit via
Bluetooth connection.
When the Bluetooth connection has been
established, the LED indicator will light in blue.
•
You can omit this operation if the connecting device
can be connected automatically via Bluetooth
connection while pairing.
•
If the device is latest recently connected one via
Bluetooth connection, this unit and the connecting
device are connected automatically via Bluetooth
connection when you turn on the power of this unit.
CONNECTING
6