Functional Description - Porter-Cable PCC842L Instruction Manual

warning:
some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to the state of
california to cause cancer, birth defects or other reproductive harm. some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
warning:
use of this tool can generate and/or disperse dust, which may
cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
The label on your tool may include the following symbols.
V ........................... volts
Hz ......................... hertz
min ........................ minutes
or DC ........... direct current
.......................... Class II Construction
.......................... safety alert symbol
......................Read instruction manual before use
..........................Use proper respiratory protection
..........................Use proper eye protection
..........................Use proper hearing protection
BPM ......................Beats per minute

functional description

1. Variable speed trigger
2. Forward/reverse button
3. Quick-load chuck
4. Magnetic bit holder
5. Charging port
6. Charging indicator
7. Charger
safety warnings and instructions - Batteries
• Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, puncture,
or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, or expose to fire, excessive heat including
soldering irons, or put in microwave oven.
• Only use the battery with a charging system specified by the manufacturer/supplier.
• Do not short-circuit a battery or allow metallic or conductive objects to contact both
battery terminals simultaneously.
• Dispose of used batteries promptly according to the manufacturer/supplier's instructions.
• Improper battery use may result in a fire, explosion, or other hazard.
A ......................... amperes
W ........................ watts
n o ....................... no load speed
4
3
1
4
or AC .............alternating
current
........................ earthing terminal
RPM or .../min ..revolutions or
reciprocations per minute
2
6
5
7