Cable Connection - Vision VDA110SMi Hardware Installation Manual

Power Adaptor (Option)
5. Cable Connection
This IP camera uses 12VDC or IEEE802.3af PoE for power source. Please make sure to use a UL/CE approved
and 12VDC regulated power supply or standard PoE injector, mid‐ or end‐span for input power.
PoE (Power over Ethernet) Support
Power over Ethernet, or PoE, technology describes a system to transmit electrical power, along with
data, to remote devices over standard twisted-pair cable in an Ethernet network. This technology is
useful for powering IP telephones, wireless LAN access points, network cameras, remote network
switches, embedded computers, and other appliances where it would be inconvenient and expensive.
(Main wiring must be done by qualified and/or licensed person)
AC Power
Ethernet
The standard IEEE 802.3af describes two types of devices: Power Sourcing Equipment (PSE)and
Powered Devices (PD). Power sourcing equipment provides power to the powered devices. The
network camera represents the powered device, whereas a PoE Injector is a PSE device. The Pro
Page 6 / 16
PoE Switch / Mid-Span / End-Span
Direct connection with standard LAN cable
CD
‐ Hardware Installation Guide (PDF)
‐ IP Camera Manual (PDF)
‐ NVR Pro Manual
‐ NVR Lite (16Ch) Program
‐ IPScan Utility Program (IP Installer)
Power Connector (DC12V)
Network Connector
Analog Video Out
Sensor In
Audio-in (Option)
Audio-out (Option)