Front . Rear Panel - Inter-m FT-100M Operation Manual

Front . Rear Panel

Front . Rear Panel
1
1. Display power ON/OFF
2. Display data to be transmitted
3. Display data to be received
4. It turns on when transmit unit and receipt unit are connected via fiber cable
Only in case between SI-100/SA-300 and PP-100/SP-100 are connected completely LED of receipt
units turn on
5. Fiber Adapter Terminal - SC Type. If the type of terminal is different in between SC type and FDF
system, please prepare additional dumper cord separately and make connection
6. UTP connection Terminal. This is for SI-100/SA-300, SP-100 and PP-100 Inter-M system and cable
connection by Direct-LAN cable. – Cross cable creates operation failure of the system
7. DC 12V adopter power connection terminal
8. System power switch
NOTE : If there is a strong power noise of installation circumstance, please wrap UPT cable once with
Ferrite Core which supplied with product to reduce the noise
MULTI-MODE OPTIC TRANSMITTER / RECEIVER
SINGLE-MODE OPTIC TRANSMITTER / RECEIVER
2 3 4
5 6 7
FT(FR)-100M / FT(FR)-100S
8
5