Rear Panel - Inter-m IPA-R10 Operation Manual

Rear Panel

Rear Panel
1
1. POWER INPUT TERMINAL
This is the terminal to connect the power (DC 24V). Be careful not to change the polarity when con-
necting.
2. REAL-TIME SHORT CHECK CAPACITY SELECTION SWITCH OF SPEAKER OUTPUT
You can select the real-time SHORT check capacity of the channel by using the corresponding switch.
※ Please pay attention to the following as malfunction may occur.
- Be careful not to turn on more than two switches.
- Please select the switch when the power is off.
3. AMPLIFIER OUTPUT LINE CONNECTION TERMINAL (AMP IN)
This is the terminal to connect the 16-channel amplifier output.
4. SPEAKER LINE CONNECTOR (SPEAKER OUT)
This is a terminal for connecting a 16-channel 3-wire speaker.
5. NETWORK CONNECTION TERMINAL
This is the terminal that connects the device to the network.
2
4
Switch Real-time short check capacity
1 ON
2 ON
3 ON
4 ON
OFF
NETWORK RECEIVER
3 5 6
7 8
0.8A
1.6A
2.4A
3.2A
4.0A
IPA-R10 5