Table of Contents
Advertisement
en
Switching the dishwasher OFF
Several minutes after the programme has
ended:
Set the main switch
Turn the water tap off.
(Does not apply when Aqua-Stop unit
has been fitted)
Remove dishes, etc. when they have
cooled down.
At the end of the programme please open
the door fully and not partially when
emptying the dishwasher. Any escaping
water vapour could damage sensitive
worktops.
Interrupting the programme
Switch off the main switch
The lit display goes out. The programme
is saved.
If there is a warm water connection or if
the machine has already heated up and
the appliance door was opened, leave
the door open for several minutes and
then close. Otherwise, expansion may
cause the appliance door to spring open.
Switch on the main switch again.
Terminating the programme
(Reset)
Only when the main switch is on:
Rotate programme selector to the
Reset position. The digital display
indicates
after approx. 3 sec.
The programme sequence lasts
approx. 1 min.
When the programme has run,
switch off the main switch
To restart, rotate the programme selector
to the required programme. Switch on
3
the main switch
1
sequence starts automatically.
16
to OFF.
1
.
1
.
1
. The programme
Changing the programme
When the appliance is switched on, the
programme can be changed
within minutes.
If the programme is changed
subsequently, programme sections
(e.g. Cleaning) which have already started
run to the end. The new remaining time
consists of the remaining time of the
previous programme section and the
remaining time of the newly selected
programme.
Intensive drying *
* on applicable models
By activating the "Intensive drying"
function, the final rinse will produce
a higher temperature in all programmes
resulting in an improved drying result
(please note that higher temperatures
might have an effect on delicate items).
Close the door.
Hold down button B and
switch on main switch
Release both buttons.
The digital display
(on) or
(off) and button B flashes.
To change the setting, press
button B .
Switch off the main switch
chosen setting has now been stored.
.
1
indicates
8
; the
1
Advertisement
Table of Contents
