System Common Message; Song Position Pointer; Song Select - Yamaha QY100 Service Manual

QY100
OMNI MODE ON
MONO MODE ON
POLY MODE ON

(3-3) SYSTEM COMMON MESSAGE

These are transmitted and received as Control Messages for QY100 functions.
They are not recorded as SEQUENCE DATA.

(3-3-1) SONG POSITION POINTER

STATUS
LSB
MSB
Transmitted when you move to a different measure in the SONG PLAY Mode.
Received when in SONG PLAY Standby.

(3-3-2) SONG SELECT

STATUS
SONG NUMBER
In the SONG PLAY Mode, this will be transmitted when a SONG is switched.
In the PATTERN PLAY Mode, this will be transmitted when a PATTERN is switched.
When in SONG PLAY Mode Standby, PATTERN PLAY Mode Standby, and PLAY, this message is received.
When received in the PATTERN PLAY Mode, the PATTERN will change.
(3-4) SYSTEM REAL TIME MESSAGE
Not recorded as Sequence Data.
(3-4-1) TIMING CLOCK
STATUS
You can select whether the internal clock will be used as the Timing Clock, or whether Timing Clock
messages from the MIDI IN will be used.
Transmission and reception can be turned On/Off.
(3-4-2) START
STATUS
Transmission/Reception can be turned On/Off.
(3-4-3) CONTINUE
STATUS
Transmission/Reception can be turned On/Off.
(3-4-4) STOP
STATUS
Transmission/Reception can be turned On/Off.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All System Exclusive Messages are recorded and played back.
Even if time intervals existed within the actual data that was received, the entire message between F0
and F7 will be recorded into one timing location.
For playback, an interval time can be specified for each 1K bytes.
56
BnH 7DH
BnH 7EH
BnH 7FH
11110010 (F2H)
0vvvvvvv SONG POSITION LSB
0vvvvvvv SONG POSITION MSB
11110011 (F3H)
0sssssss SONG NUMBER (PATTERN NUMBER in the PATTERN Mode)
11111000 (F8H)
11111010 (FAH)
11111011 (FBH)
11111100 (FCH)