Dump Request; Xg Dump Request; Xg Parameter Request - Yamaha QY100 Service Manual

00000000 00
| |
0ccccccc ccccccc
11110111 F7
For Addresses and Byte Counts, refer to the attached tables.
Check sum is the value which produces a lower 7 bits of zero when the Byte Count, Start Address, Data,
and the Check-sum itself are added.
513 bytes or more must not be transmitted at once. Thus, if a Dump Request for 513 or more bytes is
received, the date will be divided into packets of 512 bytes or less, and transmitted at an appropriate
timing interval (120 msec or longer).
The following five types are transmitted and received. (Transmitted only if a Bulk Dump Request is
received.)
System Data
Multi Effect Data (for each module)
Multi Part Data (for each part)
Drums Setup Data (for each note)
System Information (transmitted only)

(3-6-5) DUMP REQUEST

(3-6-5-1) XG DUMP REQUEST

11110000 F0
01000011 43
0010nnnn 2n
01001100 4C
0aaaaaaa aaaaaaa
0aaaaaaa aaaaaaa
0aaaaaaa aaaaaaa
11110111 F7
For Addresses and Byte Counts, refer to the attached tables.
The following four types are received.
System Data
Multi Effect Data (for each module)
Multi Part Data (for each part)
Drums Setup Data (for each note)

(3-6-6) XG PARAMETER REQUEST

11110000 F0
01000011 43
0011nnnn 3n
01001100 4C
0aaaaaaa aaaaaaa
0aaaaaaa aaaaaaa
0aaaaaaa aaaaaaa
11110111 F7
For Addresses and Byte Counts, refer to the attached tables.
The following four types are received.
System Data
Multi Effect Data
Multi Part Data
Drums Setup Data
Data
Check-sum
End of Exclusive
Exclusive status
YAMAHA ID
device Number
Model ID
Address High
Address Mid
Address Low
End of Exclusive
Exclusive status
YAMAHA ID
device Number
Model ID
Address High
Address Mid
Address Low
End of Exclusive
QY100
53