Getting The Best Sound Quality; Connections And Additional Features - DLO TransDock User Manual

Getting the Best Sound Quality

• Use IntelliTune to automatically find the optimal frequency to broadcast
your iPod over your car's FM radio. Then, tune your car's FM radio to the
frequency displayed on your TransDock.
• Choose between Mono and Stereo in Listening Mode: Mono allows for
better transmitter performance, while Stereo allows for the best sonic
musical performance.
• To get the best initial performance from your TransDock, it is
important that you set your iPod EQ to Off and adjust your car's bass
and treble controls to 0. Then you can experiment with adding bass
and treble to your desired level.
NOTE: If static or distortion increases, switch to Mono for the best
transmitter performance possible.

Connections and Additional Features

Watching iPod Videos on a Mobile Video System
If you have a mobile video system in your car, your TransDock allows you to
view your iPod video content over this system via the AV-Out Port on the bottom
of the TransDock Cradle. Plug an AV mini cable (available separately) into the
AV-Out Port and attach the connectors at the other end to your car's AV inputs.
16 | DLO TRANSDOCK USER MANUAL
IMPORTANT: With the iPod connected to your TransDock, make sure that the
iPod TV Out Setting (found under iPod Video Settings) is set to either Ask or On.
Using Your TransDock with a Cassette Adapter or Your Car's Auxiliary Input
Your TransDock can be connected to your car stereo via a cassette adapter or a
mini plug (for cars with aux-in capability). To use your TransDock with a cas-
sette adapter or car's aux-in jack, connect the adapter or mini cable to the AV-
Out Port on the bottom of the TransDock Cradle. Then, connect the other end to
your car as you normally would.
Using Your TransDock with Other MP3 Players or Audio Devices
Your TransDock will also transmit the music from other devices like an iPod
shuffle, other MP3 players, portable gaming devices, portable DVD players, etc.
To do so, plug your audio device into your TransDock Aux-In Port using a stan-
dard male-to-male mini cable (available separately). Your TransDock will
broadcast the attached device's audio using the FM transmitter. To get the best
sound quality, adjust the volume level of your device until there is no distortion.
Then, control the overall volume of your music or audio with your car stereo's
volume control.
| 17