Getting Started - DLO TransDock Direct User Manual

TransDock_direct_manual_GM2:Layout 1

Getting Started

This section will help with the initial installation of your TransDock Direct.
1. Assemble your TransDock Direct by attaching the Flex Arm to both the
Car Power Adapter and the TransDock Direct Cradle.
2. Insert your TransDock Direct into your car's power outlet. TransDock Di-
rect Cradle shows power status at a glance – one light when connected,
two when charging and three when fully charged. TransDock Direct will
indicate that it is receiving power with a single light.
3. Gently slide your iPod onto your TransDock Direct. Your iPod will now
begin charging if your car is on. TransDock Direct will indicate that it is
charging your iPod with two illuminated lights on the front of the cradle.
When the third light is illuminated, your iPod is fully charged.
4. Insert the included stereo mini cable into the Aux-In Jack on the bottom of
the TransDock Direct Cradle and connect to your car stereo's auxiliary
input. The car's aux-in port may be located on the dashboard, alongside
the stereo, under the dash or even in the glove compartment. Consult
your car's owner's manual for details.
5. Click Play on your iPod to enjoy your music over your car stereo.
NOTE:
Your iPod will automatically pause playback when your
TransDock Direct is powered off.
6 | DLO TRANSDOCK DIRECT USER MANUAL
7/30/08 6:40 PM Page 6
| 7