Samsung SPH-i330 Tips/Troubleshooting Manual page 16

Question: How can I do a HotSync modem sync with my
I330?
Answer: Due to the design of the Sprint PCS Vision
network, you CANNOT do a modem sync. However, if
your system is on the Internet, you can, instead do a
Network sync. Please see "Performing a HotSync
Operation via a Network" on page 156 of the Online
User Manual for instructions on how to set up a network
sync.
Question:. Can I do a LAN or Network sync with my
SPH-I330?
Answer: Yes, please see "Performing a HotSync
Operation via a Network" on page 156 of the Online
User Manual for instructions on how to set up a LAN or
network sync.
Question: I have connected the cable and installed the
required software, but I cannot perform a Hotsync?
Answer: Make sure that you have "Local Serial" selected
in the HotSync control panel as the type of connection.
The cable connects to your computer as a USB cable, but
the data is still transferred as a local serial connection. To
check your connection:
1. Right click on the HotSync manager icon in the tool bar.
2. If not selected, click on Local Serial.
3. Try the HotSync operation again.
Question: I have "Local Serial" selected and I am still
unable to perform a HotSync operation?
Common Problems 16