Table of Contents
Advertisement
DESCRIPTION OF THE CONTROL PANEL
H
A BC D E F GI
A
DIGITAL DISPLAY
B
"PROGRAMME SELECTION" button
C
"DELAY START" button
D
"3 in 1" option button
E
"POWER JET" option button
F
"1/2" option button
DIMENSIONS:
Height
cm
Depth
cm
Width
cm
Depth with door open
cm
TECHNICAL DATA:
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
L
M
G
"START" programme button
H
"SALT EMPTY" light
I
"RINSE AID EMPTY" light
L
Programme guide
M
"ON/OFF" button
82 ÷ 88,5
55
59,8
117
15
9 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
20
PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" programme
(which is ideal for full load daily use)
for quick and accurate selection;
- the "Auto' Memory", function saves
any programme used at least 3 times
consecutively, so that if you regularly
use the same washing cycle
you
do not have to continually set the
programme thereby saving time and
effort.
Program settings
■ Open the door and place dirty dishes
inside the appliance.
■ Press the "ON/OFF" button
.
■ After pressing the "ON/OFF" button, the
symbol of the programme which is
factory set at "recommended" or the
symbol for the "Auto' Memory" programme
will appear on the display.
■ To
select
an
option,
press
corresponding button (the indicator light
will turn on).
Option buttons must be pressed
BEFORE starting the programme for
them to be accepted.
■ To set another programme, press the
"PROGRAMME SELECTION" button ("P").
■ When the required programme is shown
in the display, press the "START" button.
The length of the program will be shown on
the display alternating hours with minutes
[I.e.: 1 h (1 hour) / 25 (25 minutes)].
■ Close the door (after an audible signal
has sounded, the programme will start
automatically).
"AUTOMATIC" programmes
The dishwasher is equipped with a dirt
sensor, able to analyse water murkiness
during all "AUTOMATIC" programme
phases (see programme list); thanks to
this sensor the washing cycle parameters
are automatically adapted to the real
quantity of dirt on dishes. Thus excellent
washing results are guaranteed while
optimising water and energy consumption.
"IMPULSE" programmes
The "IMPULSE" programmes use an
impluse washing technology, which reduces
consumption,
noise
and
performances.
IMPORTANT
The "intermittent" working of the
washing
pump
MUST
considered a malfunction, it is a
characteristic of the impulse washing
so must be considered a normal
function of the programme.
Programme interruption
the
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically and the display will flash the
remaining time before the end of the cycle.
Close the door, without pressing any
buttons. The cycle will start from where it
left off.
WARNING!
If you open the door during the
drying cycle, an audible audio signal
advises you that the drying cycle has
not yet finished.
21
increases
NOT
BE
Advertisement
Table of Contents
