Selecting A D-Net Device - Samsung LN-S4096D Owner's Instructions Manual

Selecting a D-Net device

Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1
Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See "How to connect compatible IEEE1394 Devices" on page 91)
• The device list is in the order of DTV, STB, AV-HDD, D-VHS, Camcorder and UNKNOWN.
If there are multiple devices of the same type, the devices will be listed in ascending order of the
manufacturer name with Samsung first as the exception. If there are multiple devices of the same type
and they are manufactured by the same company, they will be listed in the order of their serial number.
2
Press the D-Net button on the remote control.
• The TV and all other devices connected on the
D-Net (IEEE1394) chain appear in the D-Net
device list.
• If "UNKNOWN" is listed in the device list, the
device is not supported by the TV, and cannot be
controlled with the TV remote control or the
D-Net control panel on the screen.
3
Select a connected D-Net device by pressing the
or button.
• It is possible to connect a D-Net device to another
device and to the TV while the TV is ON.
The D-Net device list automatically adds the
newly-connected device to the list.
See "How to connect compatible IEEE1394 Devices",
page 91 for connecting D-Net (IEEE1394) Compatible
devices.
4
To select a device, press the
Then display the D-Net device control panel
and operate the selected device.
• At this time, the screen changes to the picture from the
selected device.
English-95
or button.
ENTER