Viewing The Connection Panel - Samsung LN-S4096D Owner's Instructions Manual

Viewing the Connection Panel

Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 8-14.
COMPONENT IN 1,2
Connect Component video/audio.
HDMI/DVI IN 1,2 / DVI IN (R-AUDIO-L)
Connect to the HDMI jack of a device with an HDMI output.
Use the HDMI/DVI terminal for DVI connection to an external
device with a DVI output. You should use a DVI to HDMI
cable or DVI-HDMI adapter (DVI to HDMI) for video
connection, and the DVI-IN 'R-AUDIO-L' terminal for audio.
- HDMI/DVI IN terminal does not support PC.
- No sound connection is needed for an HDMI to HDMI
connection. Sound connection is only needed for
HDMI to DVI.
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
D-NET (IEEE1394) S400MPEG
Connect to external IEEE1394 digital products such
as digital VCRs and camcorders. Two jacks are provided
for this purpose, which allow for a high degree of
flexibility for connecting your D-Net controlled system.
(Refer to page 91~105)
AV IN 1
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connect an S-Video signal from a camcorder or VCR.
ANT 1 IN (AIR)/ANT 2 IN (CABLE)
Connect to an antenna or cable TV system.
SERVICE
Connectors for service only.
AV OUT
Connect to the audio input jacks on your Amplifier/
Home theater.
PC IN
Connect to the video and audio output jacks on your PC.
POWER INPUT
Connect the supplied power cord.
KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
CableCARD TM
Insert a CableCARD into the slot. (Refer to page 14)
English-5