Indesit K3C55/R Installation And Use Manual page 7

closed.
"Gratin" is the best way of cooking sliced perch, tuna,
swordfish, stuffed squid, etc...
The turnspit
To activate the turnspit, follow the instructions below:
a) Place the dripping pan on the 1st rack.
b) Position the rotisserie support on the 3rd rack and insert
the spit towards the rear, threading it through the hole
provided.
c) Start the rotisserie by turning knob "N" to the
Oven light
This is switched on by turning knob "N" to the
oven lights up and remains lit as long as any of the electric
heating elements of the oven are in operation.
Thermostat indicator light (L)
This indicates the heating-up phase of the oven; as soon as
the inside of the oven reaches the set temperature the light
switches off. At this point the indicator light will switch on
and off intermittently; this shows that the thermostat is
operating correctly in order to maintain a constant tempera-
ture inside the oven.
The electronic timer (Q)
Warning
Keep children away from the oven door as it can become
extremely hot when the oven is in operation.
This function displays the time and works as a timer which
counts down to zero.
Note: all functions will be implemented approximately 7
seconds after they have been set.
Resetting the clock
After the appliance has been connected to the power supply,
position.
or after a power cut, the clock display will automatically reset
to 0:00 and begin to blink.
• Press button
exact time. Press and hold the buttons to quicken the count
upwards.
Any necessary modifications can be made by repeating the
above process.
Timer feature
This function may be accessed by pressing the
after which the display will show the symbol " ". Every time
the button is pressed it corresponds to a time increase of
10 seconds, until it reaches 99 minutes and 50 seconds.
After this point, each press of the button represents an
increase of one minute, up to a maximum of 10 hours.
Pressing the
symbol. The
After the time period has been set, the timer will begin to
count down. When the timer reaches zero, the buzzer will
sound (this may be stopped by pressing any button).
The time may be displayed by pressing the
the " " symbol indicates that the timer function has been
set. After approximately 7 seconds, the display will
automatically revert to the timer.
Cancelling a time that has already been set
Press the
Adjusting the buzzer volume
After selecting and confirming the clock settings, use the
button to adjust the volume of the alarm buzzer.
7
and then buttons
button reduces the time.
button until the display shows 0•00.
and to set the
button,
button, and