Assembly - Husky H1506F Operator's Manual

KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ACCESSORY KIT
The accessory kit includes a quick coupler, a 1/4 in. NPT
male connector fitting, a 1/4 in. NPT female connector
fitting, an inflation needle with adapter, an air chuck, two
inflation nozzles, and a 25 ft. coil hose.
BUILT-IN CORD WRAP
A built-in cord wrap is provided for convenience in moving
and storing the unit.
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated bear-
ings.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-340-3912 for assistance.
PACKING LIST
Air Compressor
Coil Hose
1/4 in. NPT Quick Coupler
1/4 in. NPT Male Connector Fitting
Seal Thread Tape
Air Chuck
Inflation Adapter
Inflation Nozzles (2)
Inflation Needle
Operator's Manual
Registration Card
WARNING:
If any parts are missing do not operate this tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
FEATURES
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.

ASSEMBLY

WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
ATTACHING HOSE AND QUICK COUPLER
See Figures 3 - 5.
n Make sure the air compressor is off and unplugged.
n Rotate pressure regulator knob fully counterclockwise.
n Apply seal thread tape to both ends of the coil hose.
SEAL
THREAD
TAPE
11
COIL
HOSE
Fig. 3