Troubleshooting; Ordering Replacement Parts; For Technical Support - Shark APT502C Owner's Manual

TROUBLESHOOTING

This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM POSSIBLE CAUSE
1. "On/Off" power button has
not been pressed.
Unit will not
2. Unit is not plugged in.
operate 3. The air intake grill has not
been installed and locked
into place.
1. The air intake or air outlet
Reduced air
grill may be blocked.
flow or poor 2. The permanent
filtering HEPA-Type filter may be
clogged.
The clean filter
indicator is lit
1. The unit has not been
after the filter
reset.
has been
replaced.

ORDERING REPLACEMENT PARTS

TO ORDER FILTERS
for Model APT502C
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

FOR TECHNICAL SUPPORT

for Model APT502C
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
The permanent HEPA-Type filter should be cleaned every one (1) to three (3)
months of usage depending on household environments. Some discoloration of the
permanent HEPA-Type filter material may occur, this is normal and will not affect
the filter's performance.
DO NOT WASH FILTERS WITH WATER OR DETERGENTS OF ANY KIND.
POSSIBLE SOLUTION
1. Press the "On/Off" power
button.
2. Check to make sure the unit is
plugged in.
3. Check to make sure the filters
are properly installed and the
air intake grill is installed and
locked into place.
1. Make sure nothing is in front of
or on top of the unit.
2. Check the permanent
HEPA-Type filter indicator light.
Clean the permanent
HEPA-Type filter if this
indicator is lit.
1. Turn on the machine, then
insert the end of a paperclip
into the filter reset.
1 (800) 798-7398
1 (800) 798-7398
Please Note:
8
CARACTÉRISTIQUES DE VOTRE PURIFICATEUR D'AIR
1. Filtre permanent HEPA
Le filtre permanent HEPA stoppe la
plupart des particules de poussière.
Avec un entretien régulier, le filtre n'a
jamais besoin d'être remplacé.
Nettoyez-le à l'aide d'un aspirateur.
2. Ioniseur
L'ioniseur remplit l'air d'ions négatifs
qui se fixent aux particules dans l'air.
Les ions négatifs libérés aident à
purifier l'air.
Remarque: L'ioniseur fonctionne
silencieusement.
3. Débit d'air Multidirectionnel
Sans déplacer le purificateur d'air,
vous pouvez en régler le sens en
tournant la tour sur sa base
pivotante.
4. Réglages de Vitesse de
Ventilation
Trois vitesses permettent de purifier
l'air de façon plus efficiente.
5. Témoin de Nettoyage du Filtre
Ce témoin vous indique lorsque le
filtre doit être nettoyé.
21