Advertisement
Additional accessories and replacement filters are available on sharkclean.co.uk.
Remote Control
Use the remote control to operate your air purifier from a distance.
PROBLEM
My air purifier is not powering on. What should I do?
Why is there no air flow?
Why is my air purifier vibrating or making unusual loud
noises?
Why does my air smell bad?
Can I wash the filter?
How do I know when my air purifier is in Auto Mode?
@sharkcleaninguk
Customer Service
For further assistance, call 0800 8620453.
AVAILABLE ACCESSORIES
ORDER ADDITIONAL ACCESSORIES AND REPLACEMENT FILTERS
SOLUTION
• Make sure the unit is plugged in and that the outlet works. Press the power button to start air
purification.
• Make sure the filter cover is properly installed.
• Increase the fan speed on your unit to improve performance.
• Make sure that all packaging is removed from the filter and it is properly installed in the unit.
• Unplug the unit and clean off any dust or debris from the intake and the air vent areas.
• Make sure the unit is set up on its base, and on a flat, level space on the floor.
• If there recently have been odours in the area, such as from cigarettes or food, allow more time
for the unit to remove them.
• Clean off any dust or debris from the intake and the air vent areas.
• The filter may need to be replaced.
• No, the filter is not washable. Keep filter away from water and dispose of it when it is dirty.
• The
@sharkcleanuk
SHARK® AIR PURIFIER MULTI-FILTER
Removes 99.97% of particles down to 0.3 microns from the air and
is equipped with carbon for protection against household odours
and VOCs.
TROUBLESHOOTING
MAX
button on the top control panel illuminates when the unit is in Auto Mode.
@sharkcleanuk
Advertisement
