JEFF ROWLAND CONTINUUM 250 Owner's Manual page 26

STEP 4: Adjust the Load Resistance
and Gain settings on the plug-in
Phono Card as shown in FIGURE 9.
STEP 5: Replace the bottom cover.
Using a 5/64" hex wrench, reinstall
the nine screws that secure the
bottom cover to the chassis.
© J e f f R o w l a n d d e s i g n g R o u p 2 0 0 9 . a l l R i g h t s R e s e R v e d .
FIGURE 9: CONTINUUM Phono Card Details
(Default Settings)
H1 H2 H1
Gain=60 dB, Load=400 Gain=60 dB, Load=100
ohms: Settings used for ohms: Settings used for
Moving Coil cartridges only. Moving Coil cartridges only.
H1: LOAD RESISTANCE SETTINGS: Settings in order from
top to bottom:
400 ohm, 47K ohm, 100 ohm
H2 H1 H2
Gain=40 dB, Load=47K
ohms. Settings used for Mov-
ing Magnet cartridges only.
H2: GAIN SETTINGS: Settings in order from top to bottom: 60 dB,
40 dB, 50 dB
H1 H2
Gain=50 dB, Load=47K
ohms: Settings used for
High Output Moving Coil.
25