Hotpoint CTX14 Use And Care Manual page 15

ReplacetheBase Grille
(onmodelsso equipped)
Pull the plastic filler up and off the
base grille and reinstall it on the
opposite side.
e
Replace the base grille by lining up
the clips on the back of the grille
with openings in the baseplate and
ushin"g the ~rille forward until it
RelocatethePlastic-
Coveredutility Drawer
(orI modelswithhalf-width wire
shelves)
For convenientaccess to the
utility drawer after reversingthe
door swing, you can movethe
drawer to the other side of the
cabinet.
1. Slide the drawer out and remove
the shelf to which it was attached.
2. Removeanother half-width
shelf.
3. Push the drawer cover back and
up off the shelf.
4. PLlt
the cover on the other half-
width shelf as shown, flush to the
side with the shelf-locking lugs.
Return both shelves to the
refrigerator and slide the uti~ity
drawer into its relocated cover.
--