Hotpoint CTX14 Use And Care Manual page 13

everse the .Door Handes
on
n~odeBs so equipped)
Transferthe fresh food door
handle to the right.
TOPVIEW
PLUG
BU
~ hansfer the door stop.
60TTOM VIEW
-TO remove
the handle...
s.. Removethe bottom cap by
pushing it toward the bottom of the
oor and remove the screw
nderneath.
b. Remove two screws holding the
handle to the top of the door.
c. Removethe handle.
After re~novingthe handle...
a. Remove the screws from the
right edge of the door top and insert
them into the handle screw holes on
the opposite side.
b. With tape-tipped putty knife or
[bin-b]adescrewdriver, pry out the
plug button from the hinge hole on
the left side of the door and insert it
intt]the hole on the opposite side
that was vacated by removal of the
top hinge.
e. Pull the plug button from the
fr~lntof tllc door and transfer it to
the opposile side.
- SCREWSFOR J
HANDLE
HOLES
PLUG BU~ON
7
LEFT SIDE
/
@ Move the metal door stop from
the right end to the left end. Use a
~0 Torxdriver.
~ Move any screws from the left
end to the right end.
RIGHT
SIDE
doorhalzdle. ..
a. Attach the handle to the right
side of the door with two screws at
the top of the door.
b. Screw the bottom of the handle
into place, and slide the bottom cap
into place.
13
*
tinsfer the freezerdoor
handle to the right.
LEFT SIDE
RIGHT SIDE
a. Removethe screw holding the
handleto the top of the door ad the
two screwsholding the handle to
the bottom of the door.
b. Removethe handle.
c. Removethe screw from the right
top edge of the door and insert it
into the handle screw hole on the
lefi side.
d. Pull the plug button from the
front of the door and transfer it to
the opposite side.
e. Transfer the door stop as shown
at lefi.
f. Attach the handle to the right
edge of the door with screws at top
and bottom, using bottom holes
vacated by removal of the door
stop screws.
(coiltinued ncxtpage)
—–. —
-
....... .