Husqvarna Viking 160 Instruction Book page 10

Removing the bobbin case and bobbin
Raise the needle to its
highest position. Open
the shuttle cover.
2. Open the latch on the
bobbin case and pull
the bobbin case out of
the machine.
3. Release the lat—h and
the bobbin will fall out.
Inserting the bobbin
I. Pull out abt5cm thread
from the bobbin and
insert the bobbin into
the bobbin case as illu
trated
2. Guide the thread th
rough the slot.
Thread tension spring
10cm
L
/4\
3. Pull the thread through
the slot and under the
tension spring and draw
out about 10 cm thread
Hinged latch
—8—