Configuring the Camera's Wireless Settings
Configuring a Network Profile for a Home Wireless LAN Using
WPS
The network profile for a home wireless LAN can be easily configured if the wireless LAN
access point supports WPS.
WPS supports two configuration methods: Push-Button Configuration (PBC) and
Personal Identification Number (PIN) method.
Configuring a Network Profile Using the PBC Method
1
Choose Network profile from the Wireless
settings option
(~
26) in the camera's setup menu
and press the
®
button.
2
Select Push-button WPS and press the
®
button.
3
Press the WPS button on the access point (wireless
router), then press the
®
button on the camera.
If the message,
Configuration failed.
is displayed, begin again
from step i. If configuration fails repeatedly, configure the
network profile manually (~ 28).
(T)
Network profile
Push-button
Wr>s
Press the WPS button on the
wireless router, then press the
OK button on the camera.
maStart
Done