Nikon COOLPIX S610 User Manual page 137

If
the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers in the right-most column for more information.
For Users of the COOLPIX S6l Oc
See the Wireless LAN Connection Guide for information on troubleshooting wireless
LAN problems.
Display, Settings and Power Supply
·,,,·,...,,,..,.,....,««->:,->:<-,,,,..,..,,.,.,,-:«""' · m_»".,.,.,<<<w.-,
Problem Cause/Solution
Monitor is blank
• Camera is off.
22
•
Battery is exhausted. 22
• Standby mode for saving power: press the 15,27
shutter-release button halfway.
• When flash lamp blinks red, wait until flash 31
has charged.
• Camera and computer are connected via USB
70
cable.
• Camera and TV are connected via audiol 69
video cable.
Monitor is hard to read • Adjust monitor brightness. 107
•
Monitor is dirty. Clean monitor. 120
• Monitor has dimmed to save power. Monitor
15
brightens when controls are used.
• Use monitor brightness boost. 23
Camera turns off without • Battery is low. 22
warning • Camera has turned off automatically to save 112
power.
•
Battery is cold. 119
Date and time of recording are
•
Pictures recorded before clock has been set, 18
not correct
and "Date not set" indicator blinks during
shooting, will have time stamp of
"00100/0000
00:00"; movies and voice recordings will be
dated
"01/01/200800:00."
• Check camera clock regularly against more 104
accurate timepieces and reset as required.
No indicators displayed in
Hide info
is selected for
Photo info.
107
monitor Select
Show info.
--l
rt>
n
:::r
::J
n
QJ
z
o
.....
rt>
VI
125