Inserting On The Battery; Removing The Battery; Charging The Battery - Philips Xenium Dual Band Service Manual

7.5

Inserting on the battery

7.5.1 Place the battery on the back of the phone (connectors downward, the top near the arrow inside the case).
7.5.2 Then push the battery into place in the direction of the antenna.
7.6

Removing the battery

7.6.1 Press the locking button located alongside the antenna while pushing the battery in the direction of the
arrow.
7.6.2 Remove battery.
7.7

Charging the battery

7.7.1 Plug the battery onto the transceiver
7.7.2 Plug the charger into the connector at the base of the transceiver.