Download  Print this page

LG LDP-7000 BTU User Manual

Digital key telephone
Hide thumbs

Advertisement

Important Safety Information

To prevent the unexpected danger or damage, please read
this information before installing and repairing the phone.
There are "Caution" and "Warning", it means as follows;
Warning
Caution
This means reader be careful. In this situation, you
might do something that it could result in danger.
After reading the manual, please keep it ready for the next
user.
Only trained and qualified service
personnel must install, replace or
service the phone.
When smoke or smell something
burnng, unplug the power cord or
the phone line. Call for service
center. If left intact for long
time, it may be a cause of fire
of electric shock.
This means danger. It means that it could
cause bodily injury or death.
You are capable of doing something that might
result in physical injury or equipment damage.
Warning
Do not spill liquid like water on
the phone.
If so, call for the service
center. It may result in a fire or
an electric shock.
Choose a site with a dry and
well-ventilated area. It may
result in equipment damage.

Advertisement

Table of Contents
loading

  Related Manuals for LG LDP-7000 BTU

  Summary of Contents for LG LDP-7000 BTU

  • Page 1: Important Safety Information

    Important Safety Information To prevent the unexpected danger or damage, please read this information before installing and repairing the phone. There are "Caution" and "Warning", it means as follows; This means danger. It means that it could Warning cause bodily injury or death. You are capable of doing something that might Caution result in physical injury or equipment damage.
  • Page 2 Caution Do not tug the power code or the Avoid placing the phone in a phone line. It may result in a vibrating area. If not, It may fire, an electric shock or result in equipment damage. equipment damage. Do not plug a lot of the power Do not drop or throw the phone.
  • Page 3 GSM, CDMA mobile phone)may be not compatible with the LDP-7000 BTU. The LDP-7000 BTU can be used with any compatible Bluetooth devices that support the Handsfree or Headset profiles. (Profile is a set of Bluetooth commands that the phone uses to control the headset).
  • Page 4 3-1. Unpacking Unpack the box and check the items below : Installation guide Screw (1ea) (2ea) 3-2. Installation. when installing or removing the option module the Line power must be stopped. If not, in the worst case, will damage the option module or Keyset.
  • Page 5 + 4 ) For more information, see the user's guide of the LDP- 7024D/24LD. 3. You must first pair LDP-7000 BTU with the headset you want to use. The Bluetooth connection between the headset and LDP-7000 BTU can be established by setting up a paired link.
  • Page 6 5. Using Bluetooth menu [ PGM+ + 3 ] 5-1. When Blutooth Usage is enable. [LDP-7024LD] [LDP-7024D] 5-2. When Blutooth Usage is disable. [LDP-7024LD] [LDP-7024D] [ USING BUTTON ] EXIT EXIT BLUETOOTH MENU NEXT or ▲,▼ Scroll the menu SELECT, Save, OK Select the menu...
  • Page 7 6. PAIRING 6.1 When already paired [LDP-7024LD] [LDP-7024D] 6.2 Searching for Device ※ Note. it may take about 15 seconds to finish searching for devices. [LDP-7024LD] [LDP-7024D] 1. Before you can pair your headset you need to put it into pairing mode. (Note: Pairing must be done every time the Headset establishes a link with LDP-7000BTU.
  • Page 8: Device Address

    6.3 Select device [LDP-7024LD] [LDP-7024D] 1. Devices responding to the inquiry appear on a list of Bluetooth device starting from the device found first after 15 seconds. 2. Scroll to the device you want and press OK or Save. Note : Device information DEVICE NAME (PROFILE NAME) [2/2] : JABRA 250 (HS) 00-07-A4-05-95-7B...
  • Page 9 6.4 Enter device PIN CODE(PASSWORD) [LDP-7024LD] [LDP-7024D] 1. The desired bluetooth device requests to enter the pincode of it. (The Bluetooth Passcode is a 1 to 16 character-long numeric code. ) 2. Enter the pincode and send to headset by pressing 3.
  • Page 10 7. UNPAIRING [LDP-7024LD] [LDP-7024D] 1. If you want use another headset, you can erase paired information and pair with the another headset desired 2. It will take a few seconds to erase paired information. 3. If it is unpaired already, it will display “UNPAIRING FAILED”...
  • Page 11: Device Status

    8. PAIRED INFORMATION [LDP-7024LD] [LDP-7024D] NAME:JABRA BT ( HS - C ) DEVICE STATUS Already paired but not linked-radio with headset (DISCONNECT) Ready to make and answer a call (CONNECT) 9. ICON ( only in the LDP-7024LD ) not paired or Bluetooth Usage disable state Already paired but not linked-radio with headset STADY ON Ready to make and answer a call BLINK...
  • Page 12 10.2 Make a call from the phone 1. Using the phone’s keypad, dial the phone number in speakerphone mode of the phone. 2. Press headset’s function button. 3. The call will then transfer to the headset. 10.3 Make a call from the headset 1.
  • Page 13 SEP/2004/ISSUE 1.0 P/NO : MMBB0133001 PRINTED IN KOREA...
  • Page 14 Digital Key Telephone USER’ S GUIDE LDP-7000 BTU...

This manual is also suitable for:

Ldp-7000btu