Sm-S4L 4 X 4 Stage L - Nikon SMZ645 Instructions Manual

3

SM-S4L 4 X 4 Stage L

SM-S4L 4 X 4 stage L may be attached by
using the C-4SA stage adapter. In this case,
use the C-ER auxiliary adapter because the
position of the sample will become higher.
(Refer to "4. If you cannot focus on the
sample though the zooming body is at the
highest position." on p.15.)
1 Remove the stage plate from the stand
base, and attach the C-4SA stage
adapter in place using the fixing screws
supplied with the adapter.
2 Sufficiently loosen the stage clamp
screw of the SM-S4L 4 X 4 stage L. Fit
and mount the stage onto the stage
adapter with the side equipped with the
stage clamp screw facing front. Tighten
the stage clamp screw.
18
4 X 4 stage
clamp screw
Stage adapter
fixing screw
Stage adapter
Stage