Table of Contents
Advertisement
Bottom View
CAUTION:
Before moving your piano, turn the adjuster up so that it clears the floor.
A
T
TTACHING
HE
1. Fix the headphone hook to the bottom of the piano with two screws packed in the same plastic bag.
Headphone Jacks
Screws
M4 x 12
INTRODUCTION
8. Insert the pedal connection cord that comes from Pedal Board
(C) into the piano's pedal jack and fasten with cord clamps.
(H)
9. Turn the adjuster (installed on the bottom of the Pedal Unit)
down until it makes firm contact with the floor. If the floor is
carpeted, place a spiked furniture cup under the adjuster so that
it makes firm contact with the carpet backing. Press any pedal
with your foot. If the pedal rail flexes, lower the adjuster until
flexing is minimized.
H
H
EADPHONE
Headphone Hook
(O
)
OOK
PTION
3
Advertisement
Table of Contents
