Table of Contents
Advertisement
T
Y
HANK
OU FOR
R
M
F
EAD
E
IRST
Before beginning the assembly of your CN4 read and become familiar with the assembly instructions
that follow. Then, carefully unpack the piano and check your unit against the parts list.
PARTS PROVIDED
Side Panel (A)
Back Board (B)
Pedal Board (C)
Screw (D) (M6 x 25)
Screw (E) (ø4 x 16)
Screw (F) (ø4 x 25)
Adjuster (G)
Cord Clamp (H)
Headphone Hook
(A)
INTRODUCTION
P
URCHASING A
The Kawai digital piano is a revolutionary new keyboard instrument that
combines the latest in electronic advances with traditional craftsmanship
inherited from Kawai's many years of experience in building fine pianos.
Its keyboard provides the touch response and full dynamic range required
for a superb performance on the piano, harpsichord, organ, and other
instruments. In addition, the CN piano is equipped with reverb and a digital
effect processor for an even fuller sound. Industry-Standard MIDI (Musical
Instrument Digital Interface) jacks are included which allow you to play
other electronic instruments at the same time—opening a whole new
world of musical possibilities.
This Owner's Manual contains valuable information that will help you
make full use of this instrument's many capabilities. Please read all
sections carefully and keep this manual handy for further reference.
2 pcs.
M6 x 25
1 pc.
1 pc.
4 pcs.
6 pcs.
2 pcs.
1 pc.
(D)
1 pc.
1 pc.
(a)
(C)
(E)
(b)
KAWAI D
IGITAL
ø4 x 16
ø4 x 25
(E)
(F)
1. Insert the Adjuster (G) on the Pedal Unit.
2. Untie the pedal cable on the bottom of the
Pedal Board (C).
3. Slide the metal bracket located at the end of
Pedal Board (C) on to screws (a) and (b) of Side
Panel (A). Install tighten screw (E) then tighten
screws (a) and (b). Repeat this procedure on
the other end of the Pedal Board, then raise the
completed stand assembly.
P
!
IANO
Adjuster
Cord Clamp
(G)
(H)
1
Advertisement
Table of Contents
