Ecorder Uttons; Recording (Rec Button ) - Kawai CA1000 Owner's Manual

10. R
ECORDER
R (REC B
ECORDING
REFERENCE SECTION
B
UTTONS
)
UTTON
The REC button is used for recording.
Press the REC button to enable the CA piano to record. The LED
indicator above the button starts flashing to tell you that the piano
is ready to record.
Record
SONG 1 Part=1
Begin playing some music on the keyboard. The CA piano
automatically begins recording on the first note you play.
Press the PLAY/STOP button when you are finished recording. The
piano will stop recording and save your song to memory.
Saving to memory may take a few moments and during this time the piano
will not perform any other operations.
You can start recording by pressing the PLAY/STOP button instead of
pressing a key. In this way, you can insert a blank bar at the beginning of
the song.
RECORDING ANOTHER SONG
The CA piano can record and store up to five songs.
Press the REC button to enable the CA piano to record. The LCD
Display shows you which song is ready to record.
Record
SONG 2 Part=1
The LCD Display shows the Song and Part number
to be recorded.
The LCD Display shows the Song number.
59