Using The Metronome - Kawai CA1000 Owner's Manual

NOTE
U M
SING THE ETRONOME
TUTORIAL: BASIC OPERATIONS
TO ADD REVERB
Press the REVERB button. The LED indicator will be turned on to
indicate that reverb is in use. Press and hold the REVERB button and the
currently selected reverb type will be shown in the LCD display.
Reverb Type
= Room
To change the reverb type, use the VALUE buttons.
TO ADD OTHER EFFECTS
Press the EFFECTS button. The LED indicator will be turned on to
indicate that the effect is in use. Press and hold the EFFECTS button and
the currently selected effect will be shown in the LCD display.
Effect Type
= Chorus
To change the effect type, use the VALUE buttons.
To turn off the reverb or effects, press the REVERB or EFFECTS
button again.
Any changes you make to the reverb and the effects are stored with the
preset sound in memory as long as the power is on. When you reselect a
sound, your chosen reverb and effect settings will be recalled along with
the preset sound.
When the power is turned off the effects will be reset to the factory settings
unless you use the "User Memory" function to save your current reverb
and effect settings.
For more information about the "User Memory" function please see page
50 in the reference section of this manual.
Rhythm is one of the most important elements when learning music. It is
important to practice playing the piano at the correct tempo and with a
steady rhythm. The CA piano's metronome is a tool that helps you to
achieve this by providing a steady beat for you play along with.
The reverb type is displayed.
The selected effect is displayed.
15