SCAN SECURITY
Setup allows you to make changes to the way your keypad is operating. You may access the Brightness and Volume, Display
& Audio Setup, and System Setup from the "Setup" screen.
Brightness and Volume Control
ccess the "Setup" screen as follows:
From the "Home" screen, a
ICON
1. Press the Setup icon.
2. Move the Brightness/Volume slide bar up or
down to increase or decrease settings.
Display & Audio Setup
You may access Operation Modes, Backlight Off After time, To Homepage After time, Auto Slideshow After time and
Clean Screen from Display & Audio Setup.
Operation Modes
Operation modes provides access to Chime Mode, Voice Mode, and Voice Chime which allows you to turn the keypad chime
mode and voice mode on or off.
• Chime Mode – Keypad chimes whenever a door or window is open.
• Voice Mode – Keypad voice annunciates whenever a change in system status occurs.
• Voice Chime – The chime mode and voice mode are in effect with the chime beeps followed by voice annunciation.
Access the "Operation Modes" screen as follows:
ICON
1
. From the "Setup" screen, press the Disp &
Audio Setup icon.
2. Enter your "Authorized Code", if required.
3. Select Chime Mode or Voice Mode to turn
the mode on or off.
4. Press the HOME or BACK icon after making
your selection.
Setup
ACTION
ACTION
20
NOTES
If changes are made, when you exit a Settings Changed! pop-up window
is displayed asking "Remember New Settings?"
Yes saves the change.
.
No discards the change
NOTES
If the Chime Mode and Voice Mode are both selected, the Voice Chime is
automatically selected.
It may take a few seconds for the Chime Mode to take effect.
When the keypad exits the "Operation Modes" screen, your selection is
saved.