Ordering An Assembly - ALLEN & HEATH GL 2200 Service Manual

Ordering an Assembly

The following assemblies are supplied fully tested. Please note that several of these need to be
assigned according to their position in the console.
assignment pads. It is best to check the assignment settings of the assembly you are replacing before
removing it from the console. Please quote the description and order code for the part required.
Printed Circuit Board (PCB) Assemblies:
* specify position of PCB assembly
IDC connector harnesses:
GL2200-412
GL2200-416
GL2200-424
GL2200-432
The Chassis Trim
GL2200 (all formats)
Mono Input & Connector PCB assembly
Stereo Input & Connector PCB assembly
* Group PCB assembly
OSC/Noise PCB assembly
Left PCB assembly
Right PCB assembly
Switch Mode PSU assembly (12 & 16)
Switch Mode PSU assembly (24 & 32)
20 way Main harness
20 way Main harness
20 way Main harness
20 way Main harness
Left & Right Chassis side trims
Write-on strip (specify console size)
GL2200 S
M
ERVICE
This is achieved by soldering wire links or
002-412
002-442
002-439
002-453
002-440
002-441
002-456
002-457
AL3535
AL3536
AL3537
AL3538
AA2539-L/R
AK0327
ANUAL
7