JVC PC-X290 Service Manual page 39

3.2 Front cabinet section
• Prior to performing the following procedure, remove the front cabinet section and rear cabinet section.
3.2.1 Removing the CD assembly section (See Fig.7 to 11)
(1) Disconnect the wires from connector CN201,
CN203 on the main board.
(2) Disconnect the wire from connector
board.
(3) Remove the two screws E and the two screws F attaching
the CD assembly section.
(4) Remove the five screws G attaching the LED board on the
front side of the CD assembly section.
(5) Move the CD assembly section from the front cabinet sec-
tion backward. Disconnect the card wire from connector
CN601 on the LED board.
Main boardh
CN203
Main board
CN402
E
CD assembly
G
F
CN202
CN402 on the main
CN202
CN201
Fig.7
Fig.8
E
LED board
Fig.9
Front cabinet section
and
LED board
LED board
CN601
G
CD assembly section
Main board
Fig.10
CD assembly section
Fig.11
(No.MB200)1-5