Adjustment Possibility For Control Panel; Adjust The Control Panel For The Length Of The User's Arm (All Seat Systems) - Invacare Storm4 X-plore User Manual

Power wheelchair
Hide thumbs Also See for Storm4 X-plore:
Table of Contents

Advertisement

9.1

Adjustment possibility for control panel

The following information is valid for all seating systems.
CAUTION: Danger of the control panel being pushed backwards during an accidental
collision with an obstacle, such as a doorframe or table, and the joystick being jammed
against the armpad if the position of the control panel is adjusted and all screws are not
completely tightened! This will cause the mobility device to drive forward uncontrollably
and potentially injure the mobility device user and any person standing in the way!
• When adjusting the position of the control panel, always make sure to tighten all screws
securely!
• If this should accidentally happen, immediately switch the mobility device electronics OFF at
the control panel!
9.1.1

Adjust the control panel for the length of the user's arm (all seat systems)

• Loosen wing bolts (1)†.
• Shift the remote control forwards or backwards to
the desired distance.
• Retighten the bolt.
49

Advertisement

Table of Contents
loading

Table of Contents