Table of Contents
Advertisement
STEP 1
PIVOT ARM INSTALLATION (standard pull to open)
Location of Pivot Point.
Notes:
PULL TO OPEN pulls gate open (actuator is extended when gate is in the closed position).
PUSH TO OPEN pushes the gate open (actuator is retracted when gate is in the closed
position).
For PUSH TO OPEN installations see page 12.
If a 400 Upgrade Kit is to be used, refer to the 400 instructions for pivot point location.
The following instructions provide up to 105
Left Hand Swing
Gate (closed)
13"
6"
Measurements are taken from
the center of the hinge.
Vertical position
of pivot arm
Pivot ArmMust be level
OPERATOR INSTALLATION
o
of swing.
Direction of
opening
Top View
1/2"
Hinge post
7
Right Hand Swing
13"
Center Line of attachment
point for gate bracket
Front View
6"
Hide quick links:
Advertisement
Table of Contents
