Advertisement
REMOVE THE FACTORY RADIO
*JBL Audio equipped vehicles will require additional part # DP-TYJBL1 audio interface
You will need to remove multiple interior trim components prior to removing the factory radio.
The following steps will help guide you through this process.
Carefully Remove Lower Dash Trim
Components
Use Caution, the plastic is fragile and excess force can
break or damage trim
Carefully Remove Lower Dash Trim
Components
Use Caution, the plastic is fragile and excess force can
break or damage trim.
Remove Upper Vent Trim
Use thin pry tool to carefully remove vent trim
Unplug Electrical Connections
Carefully unplug harness from back of vent assembly
Remove mounting screws
Remove 4 x 10mm bolts to remove radio
Car Show
Installation Guide
Car Show Installation Guide
STEP
2
CAUTION
CAUTION
Copyright 2012 All Rights Reserved
Page 3
Advertisement
